thanks for the help guys i really appreceate it
Brandon
| Author | Comment | ||
|---|---|---|---|
Unregistered(d) |
total horse power... |
Lead | |
|
so guys help me here what am i lookin at for top horse power in a street legal corolla..? is there a way to put a turbo Mr2 engine in any 1 know..? i want to go FAST so i can show up peeps on the drag strip here and when our drag strip opens just for imports..
thanks for the help guys i really appreceate it Brandon |
|||
Unregistered(d) |
Re: total horse power... | ||
|
Well man, you can put any engine into any car it just depends on the amount of money you want to spend.
Most people take the 4agze supercharged engine and put in place of the 4age. Some even take off the supercharger and go turbo for more boost which in return makes more power. I'm guessing your talking about a 2nd gen turbo charged MR2 engine. And yes these engines have been swapped into the AE92. Its pretty rare and I don't know much about the swap myself. For info on a swap like that you should go to club 4ag. Theres a few guys there that have done the swap. Well hope this helps. Later, Tim |
|||
Unregistered(d) |
k | ||
|
ok so the 4agze engine would fit easyly..??? and with the turbo or super charger how much HP am i lookin at?????
|
|||
Unregistered(d) |
Re: k | ||
|
Well the JDM 4agze out of the AE92 comes stock at 165hp and the US 4agze that comes out of the MR2 (88-89 i do belive) come with 145 hp stock. So depending one what you do with mods to these engines it wouldn't be real hard to get 200+ hp out of them.
If you go turbo you can probaly go alot more. It really just depends on all the other mods you put on the engine and how much money you want to spend. Hope this anwsers your question. Later, Tim |
|||
Unregistered(d) |
ok | ||
|
ok so if i get a 4agze engine out of a mr2...or the JDM (which would be easyer to find and cheaper..?) are there parts out there for it...cause im finding it hard enough to find anything for my corolla esp living in canada. now with the us engine can i up the horse some more..? i dont really know much about super chargers can i get diff pullys or something??? and my other question is how much $$ for these engines roughly??
thanks guys for all of your support i really apprecieate it!! Brandon |
|||
Unregistered(d) |
Re: ok | ||
|
Well it would be cheaper for an MR2 engine seems how you in canda. You could just go out and find an MR2 with the 4agze and pull the engine. If you go with the JDM 4agze it will cost more because you will most likely have to pay shipping charges.
As for mods to the 4agze there are quiet a few. And yes you can change pulleys on the super charger to up the boost. You can also do cams, cam gears, high flow header, cat back exhaust, intake, etc.... The cost for a 4agze, I've seen many differents prices rangeing from $500 to $1500 for a stock 4agze. You can go to club4ag.com and look thru the auction board. There is always 4agze's up for sale on there. Or you could try a junk yard and try to find an MR2 with the 4agze and pull the engine. No engine swap is cheap in my eyes but thats just my opinion. Lots of ohter people think they are cheap. Like I said it all depends on how much $$ you wanna spend. Later, Tim |
|||
Unregistered(d) |
Re: ok | ||
|
I always thought the mr2 4agze wouldn't work for the ae92.. hmm if that's the case.. what about an ECU?
Garrick,
Singled out Rolla owner. Regina |
|||
Unregistered(d) |
Re: ok | ||
|
The 4agze out of the MR2 will work just fine. The only thing that won't work out of the MR2 is the transimission. As for the ECU just use the ECU out of the MR2 you got the engine and it will work fine.
Later, Tim |
|||
Unregistered(d) |
tranny | ||
|
from what i've heard the tranny is the same...... and can work (just the linkage is different in the mr2)
|
|||
Unregistered(d) |
Re: tranny | ||
|
Wouldn't the factory ae92 transmission work with the 4agze from an mr2.
Garrick,
Singled out Rolla owner. Regina |
|||
Unregistered(d) |
Re: tranny | ||
|
I've heard that the trannys are the same also and its just the linkage. But it would just be easier to use the AE92 trans cause then you wouldn't have to mess around with custom linkage and things of that nature.
Later, Tim |
|||
Unregistered(d) |
fittings | ||
|
would the 4agze fit inot the engine compartment of my ae92? would i have to buy special brackets / make custom brackets?
|
|||
Unregistered(d) |
Re: fittings | ||
|
The 4agze fits into the AE92 without any problems. 4agze's came stock in some of the AE92's in Japan.
As for custom brackets i think you may have to modify the rear bracket/motor mount a little but i'm not 100% sure on that. Later, Tim |
|||
Unregistered(d) |
hp | ||
|
corollasrul when u said that the 4agze will get 145 hp stock what about fully modifyed: new pullys, head's, im not to familar with SC's so i dont know what else i can modify. what about NOS... would a NOS app. work in that engine or would i want to???
Weight Reduction....would my car be to light if i took out the back seats, heating all the useless junk like that. Seating if i were to say buy sparco or tenzo seats would they fit..? have u ever seen them in any of the corolla's? Short Throw Shifting, is there a short throw made for the ae92's..? if so who makes it TRD? Suspension, what is a good suspension set up for the ae92's... lowering and stif'ning, know any companys that make it for the ae92's..??? Thanks again guys for all your extremly helpfull help i really apprecieate it!! Brandon |
|||
Unregistered(d) |
Re: hp | ||
|
Yes, with mods like the supercharger pulleys, exhaust, intake, cams, and things of that nature it will always make you get more hosepower. As to an exact hosepower i really couldn't tell you. Your probaly not going to know that for sure untill you get the engine and put all the mods on it and then dyno it. The best answer you would get now would just be an estimate. But going from 145 to near 200+ probaly wouldn't be real hard with the 4agze. (correct me if i'm wrong on this anyone) but the 4agze comes stock making 8psi and with a supercharger pully you can get that up to 15psi which will be an increditble hosepower gain in itself. Then once you get all of the other mods you want on the engine it will be kicking some serious ass.
Now, with NOS i've heard good and bad things about it. I haven't used it myself so I really can't tell you on that. The best bet would be to ask someone who has used it before. I know that it will greatly increase the hosepower on any engine but you must becareful not to put to big of a shot on the engine or to use it for more then 15 secs at a time. Taking weight out of the car will always help. And taking out accesories like the a/c will help to. As for seats, I have seen many different kinds of seats in the corolla. From posche 944 seats like MAB's to MOMO, BRIDE, Tenzo R, Sparco, etc.... Short throw shifters will always help to. I know TRD makes them or use to make them. I know there are a few other companys who make them for the AE92 but I can't remember them off the top of my head. And for suspension I don't know much about that. The guy to talk to about suspension would be the webmaster of www.ae92gts.com or SONIC aka Devin. Another great site to go to for all of this info is www.club4ag.com That is were you are going to find the most info. Well, I think that answers all of your questions. If you have anymore plz feel free to ask me. Laters, Tim |
|||
Unregistered(d) |
engine question | ||
|
Hey
how much hp does the JDM 4agze supercharged engine has? and how much horse just by the engine it self. One more thing if i go torbo with the engine how much more power will i gain? by the way I have a 88 corolla gts coupe. thanks a lot Mike |
|||
Mab9981 |
THANKS TIM | ||
|
TEARING IT UP AND FILL OF INFORMATION!!!
|
|||
Unregistered(d) |
Re: THANKS TIM | ||
![]() 4AGZE's in AE92, all day long! I just dyno'd my car at 160HP and 160 FT lbs with no compensation for driveline loss or altitude(5,600 feet) Mods: +20MM oversized crank pulley ARC Type II intercooler Jinx Racing 2.25" exhaust with Yamaha YZ 1300 side pipe |
|||
Unregistered(d) |
Re: THANKS TIM | ||
|
I have the JDM 4agze in my Rolla too know, early model JDM gze though, so its 145hp stock... Its fun.
Question Devin.. Where did you get your pulley from?? |
|||
Mab9981 |
Re: THANKS TIM | ||
|
checking sig
|
|||
Mab9981 |
Re: total horse power... | ||
|
|
|||